This device is a chopping instrument designed for a wide range of duties, characterised by its segmented blade that enables for simple snapping off of lifeless segments to disclose a recent, sharp edge. Its development incorporates a sturdy deal with, typically with an ergonomic design, to boost grip and management throughout use. The mannequin designation specifies specific options comparable to blade width, total dimensions, and the producer’s designation for a particular product line identified for its sturdiness and efficiency.
The utility of one of these instrument lies in its means to keep up a persistently sharp chopping floor with out the necessity for sharpening. This function reduces downtime and enhances effectivity throughout a spread of functions, from development and DIY tasks to normal goal chopping duties. Its improvement displays an evolution in chopping device design, prioritizing consumer comfort, security, and longevity. The precise mannequin typically represents developments in supplies and development strategies, enhancing its resistance to put on and tear in demanding environments.
The next sections will element the parts, functionalities, and functions of one of these device, offering a complete overview of its options and its position throughout numerous industries.
1. Blade segmentation
Blade segmentation is a defining attribute of the Stanley 10-817 25mm FatMax Xtreme snap-off knife. This design function immediately influences the device’s usability, upkeep, and total lifespan, contributing considerably to its attraction in each skilled and DIY functions.
-
Constant Sharpness
The segmented blade design permits the consumer to show a recent, sharp innovative by snapping off a uninteresting phase. This eliminates the necessity for sharpening, sustaining constant chopping efficiency all through the blade’s lifespan. As an example, when chopping by drywall or cardboard, the preliminary phase could develop into blunt; snapping it off instantly restores optimum chopping functionality.
-
Blade Economic system and Longevity
The segmented design successfully extends the lifetime of the blade. As a substitute of discarding a blade when it turns into uninteresting in a single space, solely the worn phase is eliminated, maximizing the utility of all the blade. This design facet will increase the product’s worth proposition by decreasing the frequency of blade replacements. Utilizing the total potential of the blade reduces waste and creates value effectivity.
-
Security Concerns
Whereas blade segmentation gives benefits, it additionally introduces particular security issues. The act of snapping off a phase requires cautious execution to forestall harm. The uncovered blade edge after snapping could be notably sharp and requires warning. The design of the snap-off mechanism itself should be sturdy to make sure the blade breaks cleanly and predictably. Poor-quality instruments with unreliable snap-off mechanisms can pose a security hazard.
-
Materials Composition and Manufacturing
The effectiveness of blade segmentation is contingent upon the fabric composition and manufacturing technique of the blade. Excessive-quality metal and exact segmentation are important for clear, predictable breaks. The precise metal used within the Stanley 10-817 25mm FatMax Xtreme is chosen for its means to keep up sharpness and snap cleanly alongside the pre-scored strains.
In abstract, blade segmentation is integral to the design and performance of the Stanley 10-817 25mm FatMax Xtreme snap-off knife. This design impacts the device’s usability, upkeep necessities, security issues, and total financial worth. These components collectively affect its widespread adoption throughout numerous consumer teams.
2. Ergonomic deal with
The ergonomic deal with of the Stanley 10-817 25mm FatMax Xtreme snap-off knife represents a vital design component that immediately impacts consumer expertise, security, and effectivity. Its significance stems from the extended and sometimes repetitive nature of duties for which such instruments are employed. A poorly designed deal with can result in discomfort, hand fatigue, and an elevated danger of harm, whereas an ergonomically sound design mitigates these dangers, permitting for prolonged use and enhanced precision. The FatMax Xtreme collection, particularly, emphasizes a deal with designed for a safe and cozy grip, even beneath demanding situations.
The form, materials, and floor texture of the deal with all contribute to its ergonomic properties. Contoured grips that conform to the pure form of the hand cut back pressure on particular stress factors. Overmolded supplies, comparable to rubber or textured polymers, improve grip and stop slippage, notably in moist or oily situations. The deal with’s measurement can also be crucial; it should be massive sufficient to supply enough buy however not so massive as to trigger hand fatigue. As an example, tradespeople regularly use these knives for chopping supplies like drywall, flooring, and roofing felt. An ergonomic deal with permits them to carry out these duties for prolonged intervals with out growing hand or wrist ache, which interprets to elevated productiveness and decreased danger of work-related accidents.
In conclusion, the ergonomic deal with of the Stanley 10-817 25mm FatMax Xtreme just isn’t merely an aesthetic function however a vital part that contributes on to consumer well-being and operational effectiveness. By decreasing pressure and enhancing grip, the ergonomic design permits for safer, extra comfy, and extra productive use of the device. This design consideration underscores the significance of contemplating human components in device design, notably in skilled settings the place repetitive duties are frequent.
3. Blade Width (25mm)
The 25mm blade width of the Stanley 10-817 FatMax Xtreme snap-off knife is a key specification figuring out its utility throughout varied functions. This dimension just isn’t arbitrary; it’s intentionally chosen to steadiness chopping capability, blade sturdiness, and precision, influencing the kind of supplies that may be successfully processed and the general efficiency of the device.
-
Chopping Capability and Materials Suitability
The 25mm blade width gives a considerable innovative, enabling the device to effectively slice by thicker supplies in comparison with narrower blade options. This width is appropriate for chopping duties involving drywall, cardboard, leather-based, and a few varieties of plastic. The broader blade additionally distributes drive throughout a bigger space, decreasing the probability of blade breakage when encountering resistance. Nonetheless, the elevated width could restrict the device’s maneuverability in tight areas or when performing intricate cuts that require finer management. For instance, whereas it excels at scoring drywall, it will not be the optimum selection for delicate crafting duties.
-
Blade Stability and Sturdiness
A wider blade inherently gives better stability throughout chopping operations. The elevated floor space gives enhanced resistance to bending and deflection, leading to straighter and extra managed cuts. That is notably related when chopping supplies that are inclined to shift or buckle beneath stress. The 25mm width additionally contributes to the blade’s total sturdiness, as it may well face up to better stress earlier than fracturing or dulling. The Stanley FatMax Xtreme collection, specifically, is engineered for heavy-duty use, and the 25mm blade width enhances this design philosophy by guaranteeing the blade can endure the trials of demanding jobsite situations.
-
Drive Utility and Ergonomics
The blade width immediately influences the quantity of drive required to provoke and keep a minimize. A wider blade necessitates better drive to penetrate the fabric, particularly if the blade just isn’t exceptionally sharp. This could have ergonomic implications, as customers could must exert extra effort, probably resulting in fatigue over extended use. Subsequently, the deal with design and total ergonomics of the Stanley 10-817 are essential for mitigating these results, permitting customers to comfortably apply the required drive with out undue pressure.
-
Relationship to Snap-Off Segmentation
The 25mm blade width works in live performance with the snap-off segmentation design. This width gives ample materials for a number of segments, every providing a recent innovative as wanted. The segmentation intervals are designed to optimize the usage of the blade materials whereas sustaining ample structural integrity for every phase. The 25mm width permits for a steadiness between the variety of segments and the sturdiness of every phase, contributing to the general longevity and worth of the blade. The effectivity of the snap-off mechanism is important to totally notice the advantages of this design.
In summation, the 25mm blade width is a defining attribute of the Stanley 10-817 FatMax Xtreme snap-off knife, influencing its chopping capability, sturdiness, ergonomics, and the effectiveness of its snap-off segmentation. This dimension is rigorously thought-about to optimize the device’s efficiency throughout a broad vary of functions, solidifying its place as a flexible and dependable chopping instrument.
4. Sturdiness
Sturdiness is a paramount consideration within the design and collection of any chopping device, and it performs a very important position in evaluating the Stanley 10-817 25mm FatMax Xtreme snap-off knife. This attribute dictates the device’s lifespan, its means to resist demanding work environments, and its total worth proposition. The “FatMax Xtreme” designation itself suggests an emphasis on robustness and longevity.
-
Materials Composition and Building
The sturdiness of the Stanley 10-817 stems from the supplies utilized in its development. Excessive-carbon metal is commonly employed for the blade to supply a steadiness of hardness and toughness, resisting put on and fracture. The deal with sometimes incorporates impact-resistant polymers or composite supplies designed to resist drops, impacts, and publicity to harsh chemical substances or solvents. The standard of the supplies and the precision of the manufacturing processes immediately have an effect on the device’s means to endure extended use and adversarial situations. As an example, a development employee utilizing the knife each day on a job website requires a device able to withstanding fixed abrasion and potential unintentional impacts.
-
Blade Section Integrity and Break Resistance
The snap-off design necessitates a blade with rigorously engineered segmentation. The integrity of those segments and their resistance to untimely breakage are essential for sturdiness. A blade that snaps prematurely or fails to interrupt cleanly compromises security and reduces the device’s usability. The design and manufacturing processes should guarantee constant and predictable breaking factors whereas sustaining the power of every phase. When chopping thick cardboard or a number of layers of fabric, a blade with weak segments would shortly develop into unusable, highlighting the significance of phase integrity.
-
Deal with Ergonomics and Structural Integrity
Whereas the ergonomic design of the deal with contributes to consumer consolation, it additionally impacts the device’s total sturdiness. A deal with that’s poorly connected or liable to cracking beneath stress will render the device unusable, whatever the blade’s situation. The deal with should be securely mounted to the blade housing and able to withstanding important drive with out deformation or failure. Tradespeople making use of substantial stress to the knife whereas chopping by dense supplies require a deal with that maintains its structural integrity, stopping slippage or breakage.
-
Corrosion Resistance
Publicity to moisture and corrosive substances can considerably degrade the sturdiness of a chopping device. The Stanley 10-817 typically incorporates coatings or finishes on the blade and deal with to boost corrosion resistance. That is notably necessary in environments the place the device could also be uncovered to humidity, saltwater, or chemical substances. A knife utilized in plumbing or marine functions, for instance, requires enhanced corrosion resistance to forestall rust and keep its performance over time.
The sides of fabric composition, blade phase integrity, deal with development, and corrosion resistance collectively decide the general sturdiness of the Stanley 10-817 25mm FatMax Xtreme snap-off knife. These components are interconnected, and a weak point in anybody space can compromise the device’s lifespan and efficiency. The “FatMax Xtreme” designation displays a deliberate engineering effort to maximise these features, making a device that may face up to the calls for {of professional} use and supply long-term worth.
5. Snap-off Mechanism
The snap-off mechanism is a defining attribute of the Stanley 10-817 25mm FatMax Xtreme snap-off knife, immediately influencing its performance and consumer expertise. This mechanism permits the consumer to show a recent, sharp innovative by breaking off a uninteresting phase of the blade, thereby eliminating the necessity for sharpening and lengthening the blade’s usable life.
-
Mechanism Elements and Operation
The snap-off mechanism sometimes contains a slider or push-button that advances the blade, a locking mechanism to safe the blade on the desired extension, and pre-scored segments alongside the blade’s size. To reveal a brand new innovative, the consumer extends the blade, aligns the uninteresting phase with a chosen breaking level, and applies stress to snap it off, typically utilizing a built-in breaker or pliers. The effectiveness of this mechanism relies on the precision of the blade segmentation and the reliability of the slider and locking parts. A malfunctioning locking mechanism can result in blade slippage, posing a security hazard.
-
Security Options and Concerns
The design of the snap-off mechanism incorporates security options to attenuate the danger of harm. These options embody a sturdy locking mechanism to forestall unintentional blade retraction, a contoured deal with for safe grip, and generally, a blade snapper to securely break off uninteresting segments. Nonetheless, the consumer should train warning when snapping off blade segments to keep away from cuts or flying particles. Correct coaching and adherence to security tips are important for the secure and efficient use of this mechanism. The mechanism’s reliability contributes to the general security profile, the place a poorly designed mechanism may trigger unpredictable blade snapping.
-
Materials Composition and Sturdiness of the Mechanism
The supplies used within the snap-off mechanism’s development considerably affect its sturdiness and longevity. Excessive-quality steel or strengthened polymers are sometimes employed to resist the repeated stress of blade extension, retraction, and locking. The mechanism’s resistance to put on and tear immediately impacts the device’s lifespan and its means to keep up constant efficiency over time. The Stanley 10-817 FatMax Xtreme, with its emphasis on sturdiness, sometimes incorporates sturdy supplies in its snap-off mechanism to make sure dependable operation beneath demanding situations. An affordable mechanism results in speedy put on, making the general device ineffective.
-
Upkeep and Substitute
The snap-off mechanism requires minimal upkeep, sometimes involving occasional cleansing to take away particles that might impede its operation. Nonetheless, the mechanism’s parts are topic to put on and tear, and ultimately, substitute could also be vital. The supply of substitute elements and the benefit of disassembly and reassembly are components that affect the device’s long-term worth. A well-designed mechanism permits for simple blade substitute and, in some instances, component-level repairs, extending the device’s service life. The complexity of the mechanism can deter customers from making an attempt repairs, emphasizing the worth of a sturdy, long-lasting design.
In conclusion, the snap-off mechanism is an integral element of the Stanley 10-817 25mm FatMax Xtreme snap-off knife, immediately impacting its usability, security, and longevity. The design, supplies, and operation of this mechanism are crucial issues in evaluating the device’s total efficiency and suitability for varied chopping duties. The mechanism’s reliability, mixed with correct consumer approach, permits environment friendly and secure use of the device.
6. FatMax Xtreme Sequence
The “FatMax Xtreme Sequence” represents a product line from Stanley identified for enhanced sturdiness and efficiency traits. The “Stanley 10-817 25mm FatMax Xtreme snap-off knife” is a particular product inside this collection, inheriting the collection’ design ideas and materials selections meant to supply superior resilience in demanding functions. The collection designation signifies the knife is engineered to resist harsher situations and extra frequent use in comparison with normal Stanley choices. As an example, the deal with materials could also be upgraded to resist increased affect forces, or the blade locking mechanism could also be strengthened to withstand put on. This affiliation results in an expectation of better reliability and prolonged lifespan for the knife. The mixing of “FatMax Xtreme Sequence” parts within the “Stanley 10-817 25mm FatMax Xtreme snap-off knife” creates a product designed for skilled use.
A sensible consequence of this connection is the knife’s suitability to be used in development, industrial, or different demanding environments. Professionals comparable to electricians, plumbers, and carpenters typically require instruments able to withstanding each day use and potential publicity to harsh situations. The “FatMax Xtreme Sequence” designation indicators to those customers that the knife is designed to satisfy these necessities. The improved sturdiness traits present a level of confidence, probably decreasing the frequency of replacements and minimizing downtime attributable to device failure. A business development crew, for instance, may select the 10-817 attributable to its repute inside the FatMax Xtreme lineup, resulting in fewer interruptions attributable to device malfunction.
In abstract, the “FatMax Xtreme Sequence” designation is a crucial element of the “Stanley 10-817 25mm FatMax Xtreme snap-off knife,” influencing materials choice, design options, and total efficiency expectations. The connection implies a deal with enhanced sturdiness and suitability for demanding functions, translating to tangible advantages for skilled customers. Though challenges associated to device upkeep and acceptable utilization stay, the affiliation with the “FatMax Xtreme Sequence” gives a degree of assurance concerning the knife’s means to resist rigorous use.
7. Mannequin Identification (10-817)
The mannequin identification code “10-817” serves as a singular identifier for a particular configuration of the Stanley 25mm FatMax Xtreme snap-off knife. This code is essential for distinguishing this specific device from different comparable fashions inside the Stanley product line and for precisely referencing its specs, substitute elements, and associated documentation.
-
Specification Precision
The “10-817” designation ensures that customers and retailers can exactly establish the device’s traits, together with blade width, deal with design, and particular options inside the FatMax Xtreme collection. For instance, a elements provider can use this code to substantiate {that a} substitute blade is appropriate with the meant device, stopping errors in ordering and guaranteeing correct performance. The dearth of a exact identifier may result in the collection of incompatible parts, affecting efficiency and security.
-
Guarantee and Help
The mannequin quantity is important for guarantee claims and buyer assist inquiries. Stanley and its approved service suppliers use this code to confirm the device’s authenticity and decide the applicability of guarantee protection. The absence of a sound mannequin quantity or an try to assert guarantee on a counterfeit product would probably lead to denial of service. This code safeguards each the producer and the patron in opposition to fraudulent actions.
-
Stock Administration and Logistics
Retailers and distributors depend on the “10-817” designation for environment friendly stock administration and logistics. This code permits correct monitoring of inventory ranges, streamlined order processing, and correct categorization of the device inside product catalogs. The usage of standardized mannequin numbers reduces the danger of transport errors and ensures that prospects obtain the proper product. An inaccurate or lacking mannequin quantity may disrupt provide chains and result in buyer dissatisfaction.
-
Product Documentation and Security Data
The “10-817” identifier is immediately linked to particular product documentation, together with consumer manuals, security directions, and technical specs. This documentation gives customers with important data on the right use, upkeep, and potential hazards related to the device. Entry to correct documentation is crucial for guaranteeing secure operation and maximizing the device’s lifespan. With no particular mannequin quantity, finding and referencing the proper documentation could be considerably tougher, probably growing the danger of accidents or improper dealing with.
In conclusion, the mannequin identification code “10-817” is an indispensable component of the Stanley 25mm FatMax Xtreme snap-off knife. It facilitates exact specification, guarantee assist, environment friendly stock administration, and entry to essential product documentation, contributing to the general reliability and worth of the device. This identifier just isn’t merely an arbitrary quantity however a key element of the product’s identification and its integration inside the broader Stanley ecosystem.
Incessantly Requested Questions
This part addresses frequent inquiries and considerations concerning the Stanley 10-817 25mm FatMax Xtreme snap-off knife, offering readability on its options, utilization, and upkeep.
Query 1: What distinguishes the FatMax Xtreme collection from different Stanley snap-off knives?
The FatMax Xtreme collection emphasizes enhanced sturdiness and robustness in comparison with normal Stanley knives. This sometimes interprets to stronger supplies within the deal with development, a safer blade locking mechanism, and an total design meant to resist rigorous use and demanding work environments. The precise enhancements current within the 10-817 mannequin are aligned with this core precept.
Query 2: How does one safely eliminate snapped-off blade segments?
Snapped-off blade segments pose a laceration hazard and should be disposed of responsibly. The really useful observe entails amassing the segments in a puncture-resistant container, comparable to a heavy-duty plastic bottle or a chosen sharps container. This container needs to be clearly labeled to point its contents and disposed of in accordance with native rules for sharp waste disposal.
Query 3: What sort of blade substitute is really useful for the 10-817 mannequin?
The Stanley 10-817 25mm FatMax Xtreme snap-off knife is designed to simply accept 25mm snap-off substitute blades. It’s advisable to make use of real Stanley substitute blades or these particularly really useful by Stanley for optimum efficiency and security. Utilizing non-compatible blades could compromise the knife’s performance and enhance the danger of accidents.
Query 4: What upkeep is required to make sure the longevity of this device?
Minimal upkeep is required for the Stanley 10-817. Common cleansing to take away collected particles from the blade slider and locking mechanism is really useful. A dry material is usually ample; keep away from utilizing extreme lubricants, as they will entice filth and hinder the mechanism’s operation. Inspecting the blade locking mechanism periodically for indicators of wear and tear or injury can also be advisable.
Query 5: What are the first security precautions to look at when utilizing a snap-off knife?
Security precautions embody at all times retracting the blade absolutely when not in use, utilizing acceptable private protecting gear comparable to gloves and eye safety, and snapping off blade segments rigorously and away from oneself and others. By no means apply extreme drive when chopping, and at all times make sure the workpiece is securely supported. A pointy blade is safer than a uninteresting blade, as much less drive is required.
Query 6: Can the blade locking mechanism be adjusted or tightened if it turns into unfastened?
The blade locking mechanism within the Stanley 10-817 is usually not designed for consumer adjustment. If the locking mechanism turns into unfastened or fails to securely maintain the blade, it could point out put on or injury. In such instances, the device needs to be inspected by a professional technician or changed to keep away from potential security hazards. Trying unauthorized repairs could void the guarantee and compromise the device’s integrity.
In essence, accountable use, correct disposal, and adherence to security tips are paramount when working the Stanley 10-817 25mm FatMax Xtreme snap-off knife.
The next part will elaborate on sensible functions of the Stanley 10-817 25mm FatMax Xtreme snap-off knife.
Optimizing Utility
To maximise the efficiency and lifespan of this device, adherence to particular tips is really useful. The next ideas promote secure and environment friendly operation.
Tip 1: Choose Applicable Blade Extension. Lengthen the blade solely to the minimal size required for the duty at hand. Extreme extension will increase the danger of blade breakage and compromises chopping precision. Make sure the locking mechanism is absolutely engaged earlier than making use of stress.
Tip 2: Make use of Right Chopping Angle. Preserve a shallow chopping angle to attenuate stress on the blade. Keep away from twisting or bending the blade throughout use, as this could result in untimely put on or fracture. Use a managed, deliberate movement.
Tip 3: Make the most of Applicable Chopping Floor. Make use of an appropriate chopping floor, comparable to a self-healing mat or a bit of scrap materials. Keep away from chopping immediately on onerous surfaces like concrete or steel, as this dulls the blade quickly and will increase the danger of slippage.
Tip 4: Preserve Cleanliness. Commonly clear the blade and the interior mechanism to take away collected particles. Use a dry material to wipe down the device after every use. Keep away from utilizing solvents or lubricants that might degrade the plastic parts.
Tip 5: Eliminate Blade Segments Responsibly. Gather snapped-off blade segments in a puncture-resistant container. Securely seal the container and eliminate it in accordance with native rules for sharps waste. By no means discard unfastened blade segments typically trash receptacles.
Tip 6: Retailer the Knife Safely. When not in use, absolutely retract the blade and have interaction the locking mechanism. Retailer the knife in a chosen location away from youngsters and unauthorized customers. Think about using a device pouch or holster for secure transport.
Tip 7: Exchange Blades Promptly. Exchange the blade when it turns into uninteresting or broken. Trying to drive a uninteresting blade will increase the danger of slippage and harm. Use solely real Stanley substitute blades or these particularly really useful for the 10-817 mannequin.
Adhering to those tips extends the service lifetime of the knife, and enhances consumer security. Correct dealing with and storage are crucial.
This concludes the sensible ideas part. A summation of the important thing factors of the “Stanley 10-817 25mm FatMax Xtreme snap-off knife” follows.
Conclusion
This exploration of the Stanley 10-817 25mm FatMax Xtreme snap-off knife has detailed its key options, encompassing blade segmentation, ergonomic deal with design, blade width issues, inherent sturdiness, the performance of its snap-off mechanism, its affiliation with the FatMax Xtreme collection, and the importance of its mannequin identification. It has established the device as a mix of sensible design parts meant to satisfy skilled wants, providing a steadiness between utility, security, and longevity.
In abstract, the Stanley 10-817 capabilities as a consultant of its device class, embodying design selections tailor-made to maximise effectivity and face up to demanding use instances. Its worth proposition rests in its means to ship constant efficiency with acceptable dealing with. As device designs evolve, the ideas evident on this mannequin could proceed to tell future improvements. The consumer’s adherence to security tips and really useful practices stays paramount in realizing its meant advantages.
